Guides and Technical Advice
16 October 2026
A plain-English guide to BS EN 13241 and the related standards for industrial doors in the UK, and what to ask your supplier before you buy.
BS EN 13241 is the product standard for industrial, commercial and garage doors and gates. It sets out the performance characteristics a door has to meet and declare, including safety in use, resistance to wind load and water and air permeability. For a power-operated high speed door, it is the standard your supplier’s documentation should refer to.
This guide is general information to help you ask the right questions. It is not legal advice, and your own risk assessment and the current text of the standards take priority.
BS EN 13241 works together with a family of related standards. EN 12453 covers the safety in use of power-operated doors, including the forces a door may exert and the protection against crushing, shearing and trapping. EN 12604 covers mechanical aspects such as strength and stability. EN 12978 covers safety devices such as photocells, safety edges and light curtains. EN 12424 sets out the classification of resistance to wind load, which is where wind classes such as CL2 or CL4 come from. EN 12635 covers installation and use.
In practice, safety shows up in a handful of features: protection against crushing and trapping at the leading edge, devices that detect an obstruction so the door can stop and reverse, controlled operating forces, and predictable behaviour when a safety device is triggered.
On a high speed door, much of this work is done by the soft, flexible bottom edge, which is designed to give way on impact, and by the photocell or safety light curtain that watches the doorway. On AUTO-FULL® the safety light curtain is an option, so check what is included in the specification you are quoted. ROLL-UP®, which is for internal use only, uses a single-beam photocell.
For external doors, yes. Wind load is one of the performance characteristics covered by BS EN 13241, and it is classified under EN 12424. AUTO-FULL® has a rating of CL2 to CL4, depending on size, and our external folding doors are built for exposed sites. Always ask for the class that applies to the size of door you are buying, not just a general statement.
Doors covered by BS EN 13241 are supplied with a declaration of performance and the conformity marking that applies where they are sold. UK marking rules have changed since Brexit and continue to be updated, so ask your supplier which marking applies to the door you are buying and ask to see the supporting documents, rather than relying on a general statement.
Safety does not end at handover. Health and safety law in Great Britain, including the Workplace (Health, Safety and Welfare) Regulations 1992, expects doors and gates, including power-operated ones, to be safe to use and to be kept in good working order. In practice that means a risk assessment, regular checks and planned servicing by a competent person, and our guide to high speed door maintenance explains what to check and when.
Ask which standards the door has been tested to and ask to see the documentation. Ask what wind class it carries for the size you need. Ask which safety devices come as standard and which are optional. Ask what the installation, commissioning and handover include, and who will be responsible for servicing afterwards. A reliable supplier will answer all of these clearly.
If you are an architect or specifier, GS Doors provides technical drawings and specification support, and we are a member of the Door and Hardware Federation (DHF). See our page for architects and specifiers, or tell us about your project and our technical team will help you choose and specify the right door.
Share this article
Tell us about your project and our technical team will help you with the specification.
Talk to our team