How to Choose the Right High Speed Door | GS Doors

Guides and Technical Advice

How to Choose the Right High Speed Door for Your Warehouse

23 September 2026

Not every high speed door is built the same way, and choosing the wrong one for your opening can cost you more than the price difference between models. A door that's under-specified for its duty cycle will wear out fast; one that's over-specified for a light-use internal opening means paying for features you'll never use. Here's what actually determines the right choice for a warehouse or distribution centre.

Start with how the opening is used

Before comparing models, look at the opening itself. Is it internal, moving stock between two areas of the same building? Or does it open directly onto a loading bay or the outside? This one factor rules out entire categories of door before you even get to specifications. An internal warehouse opening has different demands — no wind, no rain, but often very frequent cycling — to an external bay, which needs to survive UK weather on top of everything else.

For most warehouse and distribution centre openings that stay indoors, GS Doors' Rapid Roll Doors range is the starting point. If your opening faces the outside, you're looking at a different category — external folding doors — which is a subject in its own right.

Match the model to your duty cycle

Within the Rapid Roll Doors range, the choice usually comes down to two models: AUTO-FULL® and ROLL-UP®.

AUTO-FULL® is the premium option, built for high-frequency, continuous use — the kind of opening that forklifts and staff pass through dozens or hundreds of times a day. It's tested to withstand up to 1,000,000 open-close cycles, comes with a durable PVC curtain, an optional safety light curtain, and a protective motor cover, and carries a high wind resistance rating (CL2–CL4, depending on size) that makes it suitable even for semi-exposed locations.

ROLL-UP® is the simplified, cost-effective alternative — designed specifically for internal use, with a single-beam photocell and anti-drift system rather than AUTO-FULL®'s fuller specification. It's the right call when the opening is lighter-duty: internal, lower frequency, and without the higher wind-resistance requirements AUTO-FULL® is built to meet.

If your site cycles the door constantly and can't afford unplanned downtime, that reliability margin is usually worth paying for. If the opening is lighter use and stays indoors, ROLL-UP® does the job without the extra cost.

Check the opening size against the model's limits

Every model has a maximum opening size, and it's worth checking before you get too far into a decision. AUTO-FULL® covers openings up to 6000mm wide × 6000mm high; ROLL-UP® is built for smaller openings, up to 4000mm × 4000mm. If your opening is larger than ROLL-UP® can cover, that decides the question for you regardless of duty cycle.

Share this article

Not sure which door fits your opening?

Tell us about your opening and our technical team will point you to the right model.

Talk to our team

Keep reading